Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Rear Wheel of the Piaggio Vespa PX 125 - Lml Star 125

Model: Piaggio Vespa Px 125
Part: Wheel

Video tutorial

In today's tutorial, you will see the procedure for removing and replacing the rear wheel of the Piaggio Vespa PX 125, as well as the Lml Star 125 and 150. First, place the central stand and start by removing the left side storage box; then unscrew the spare wheel bolts using a 13 mm socket spanner.

At this point, lift the Vespa at the rear to remove the wheel by unscrewing the five nuts; replace the wheel with the new one, securing it properly, and finally place the old wheel in the side storage box!


Updated on 3 June 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Suspension on a Piaggio Vespa PX 125 - Lml Star 125
How to Replace the Rear Suspension on a Piaggio Vespa PX 125 - Lml Star 125
Vespa Px 125 .. on a Piaggio Vespa PX 125, as well as on an Lml Star 125. First, place the central stand and begin to lift the rear wheel off the ground; then use.. …
How to replace the tyre on the Piaggio Vespa PX 125 - LML Star 125
How to replace the tyre on the Piaggio Vespa PX 125 - LML Star 125
Vespa Px 125 .. tyre of the Piaggio Vespa PX 125, as well as the LML Star 125. First, place the central stand and lift the rear wheel off the ground; then, unscrew and.. …
How to Replace the Rear Wheel of the Piaggio Vespa PX 125 - LML Star 125
How to Replace the Rear Wheel of the Piaggio Vespa PX 125 - LML Star 125
Vespa Px 125 .. rear wheel of the Piaggio Vespa PX 125 and the LML Star 125. First, place the central stand and begin by removing the left side storage box; then unscrew.. …

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos