Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Suspension on a Piaggio Vespa PX 125 - Lml Star 125

Model: Piaggio Vespa Px 125
Part: Suspension system

Video tutorial

This brief guide outlines the steps to remove and replace the rear suspension on a Piaggio Vespa PX 125, as well as on an Lml Star 125. First, place the central stand and begin to lift the rear wheel off the ground; then use two spanners to undo the lower suspension bolt, as shown in the video.

Next, remove the nut located at the top; to access it, you will need to remove the fuel tank.

Finally, reassemble everything, following the video tutorial to the end!


Updated on 27 May 2026 by ScegliAuto


Related tutorials

Replacing the Rear Suspension of the Piaggio Vespa PX 125 - LML Star 125
Replacing the Rear Suspension of the Piaggio Vespa PX 125 - LML Star 125
Vespa Px 125 In this short and simple guide, we will go through the steps to remove and replace the rear suspension of the Piaggio Vespa PX 125, as well as the LM…
How to Remove the Engine from a Piaggio Vespa PX 125 - Lml Star 125
How to Remove the Engine from a Piaggio Vespa PX 125 - Lml Star 125
Vespa Px 125 .. the bodywork of the Piaggio Vespa PX 125 and the LML Star 125. First, place the central stand on your scooter and start by removing the side storage.. …
How to Replace the Gear Oil of the Piaggio Vespa Px 125 - Lml Star 125
How to Replace the Gear Oil of the Piaggio Vespa Px 125 - Lml Star 125
Vespa Px 125 .. oil of the Piaggio Vespa Px 125, as well as the Lml Star 125 2-stroke. First, place the central stand and start unscrewing the oil drain bolt located.. …

How to Replace the Front Brake Pads on a Kymco Gran Dink 250

To replace the front brake pads on a Kymco Gran Dink 250, loosen the screws that secure the front brake caliper to detach it from the corresponding disc. Once the caliper is detached, remove the pads inside it and insert the new replacement pads into their housing. After inserting them, reposition the caliper onto the corresponding disc and secure it with the appropriate bolts. After installation, check that the front brake functions correctly.

Watch the video!


by ScegliAuto

More videos