Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Suspension of the Piaggio Vespa PX 125 - LML Star 125

Model: Piaggio Vespa Px 125
Part: Suspension system

Video tutorial

In this short and simple guide, we will go through the steps to remove and replace the rear suspension of the Piaggio Vespa PX 125, as well as the LML Star. First, place the central stand and begin to remove the fuel tank; to do this, unscrew the fixing screws found on the sides, disconnecting the fuel line as shown in the video.

Next, unscrew the bolt located at the top of the suspension, then remove the pin situated on the other side; remove and replace the suspension with the new one!


Updated on 14 June 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Suspension on a Piaggio Vespa PX 125 - Lml Star 125
How to Replace the Rear Suspension on a Piaggio Vespa PX 125 - Lml Star 125
Vespa Px 125 .. on a Piaggio Vespa PX 125, as well as on an Lml Star 125. First, place the central stand and begin to lift the rear wheel off the ground; then use.. …
How to Remove the Engine from a Piaggio Vespa PX 125 - Lml Star 125
How to Remove the Engine from a Piaggio Vespa PX 125 - Lml Star 125
Vespa Px 125 .. the bodywork of the Piaggio Vespa PX 125 and the LML Star 125. First, place the central stand on your scooter and start by removing the side storage.. …
How to Change the Rear Wheel of the Piaggio Vespa PX 125 - Lml Star 125
How to Change the Rear Wheel of the Piaggio Vespa PX 125 - Lml Star 125
Vespa Px 125 .. wheel of the Piaggio Vespa PX 125, as well as the Lml Star 125 and 150. First, place the central stand and start by removing the left side storage box;.. …

How to Replace the Gear Oil of the Piaggio Vespa PX 125

To replace the gear oil of the Piaggio Vespa PX 125, loosen the drain plug of the oil reservoir located at the bottom of the transmission casing on the right side of the scooter. Once the plug is loosened, collect all the used oil in a suitably positioned container until it has completely drained. Now, top up the oil through the breather located on the transmission casing using a pump. After adding the new oil, you can start the engine to check that everything is functioning properly.

Watch the video!


by ScegliAuto

More videos