Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Engine from a Piaggio Vespa PX 125 - Lml Star 125

Model: Piaggio Vespa Px 125
Part: Engine

Video tutorial

In this video tutorial, you will learn how to remove the engine from the bodywork of the Piaggio Vespa PX 125 and the LML Star 125. First, place the central stand on your scooter and start by removing the side storage box; then disconnect the carburettor by removing the filter box and the intake duct (disconnect the throttle cable).

At this point, disconnect the rear suspension and the engine mounting bolt to the frame; remove the fuel tank and disconnect the gearbox wires, following the video to the end!


Updated on 18 May 2026 by ScegliAuto


Related tutorials

How to Remove the Handlebar Cover and Front Headlight on the Piaggio Vespa PX 125 - Lml Star 125
How to Remove the Handlebar Cover and Front Headlight on the Piaggio Vespa PX 125 - Lml Star 125
Vespa Px 125 .. front headlight on the Piaggio Vespa PX 125 and Lml Star 125. First, place the bike on its central stand and begin unscrewing the screws securing the.. …
How to Replace the Gear Oil of the Piaggio Vespa Px 125 - Lml Star 125
How to Replace the Gear Oil of the Piaggio Vespa Px 125 - Lml Star 125
Vespa Px 125 .. oil of the Piaggio Vespa Px 125, as well as the Lml Star 125 2-stroke. First, place the central stand and start unscrewing the oil drain bolt located.. …
How to Change the Rear Wheel of the Piaggio Vespa PX 125 - Lml Star 125
How to Change the Rear Wheel of the Piaggio Vespa PX 125 - Lml Star 125
Vespa Px 125 .. wheel of the Piaggio Vespa PX 125, as well as the Lml Star 125 and 150. First, place the central stand and start by removing the left side storage box;.. …

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos