Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
This guide outlines the steps to remove and replace the handlebar cover and front headlight on the Piaggio Vespa PX 125 and Lml Star 125. First, place the bike on its central stand and begin unscrewing the screws securing the handlebar cover at the bottom. Next, unscrew the screws securing the front headlight, disconnecting the various electrical connectors and releasing the bulb clip, as shown in the video. At this point, replace the front optical unit if necessary, and finally reassemble the handlebar cover!

Updated on 20 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Engine from a Piaggio Vespa PX 125 - Lml Star 125
How to Remove the Engine from a Piaggio Vespa PX 125 - Lml Star 125
Vespa Px 125 .. the bodywork of the Piaggio Vespa PX 125 and the LML Star 125. First, place the central stand on your scooter and start by removing the side storage.. …
How to Replace the Air Filter on the Piaggio Vespa PX 125 - LML Star 125
How to Replace the Air Filter on the Piaggio Vespa PX 125 - LML Star 125
Vespa Px 125 .. on the Piaggio Vespa PX 125, as well as the LML Star 125 and Star 150. First, remove the right side panel of the engine and start by taking off.. …
How to Replace the Rear Suspension on a Piaggio Vespa PX 125 - Lml Star 125
How to Replace the Rear Suspension on a Piaggio Vespa PX 125 - Lml Star 125
Vespa Px 125 .. on a Piaggio Vespa PX 125, as well as on an Lml Star 125. First, place the central stand and begin to lift the rear wheel off the ground; then use.. …

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos