|
Do it yourself
| |||
| ||||
|
Model: Piaggio Vespa Px 125
In this video tutorial, you will see the steps to remove and replace the rear wheel and tyre of the Piaggio Vespa PX 125, as well as the LML Star 125. First, place the central stand and lift the rear wheel off the ground; then, unscrew and remove the five wheel nuts to detach it from the drum, as shown in the video. At this point, remove the tyre from the rim using levers; then, remove and replace the tyre with a new one, following the reverse procedure for reassembly!
Updated on 10 July 2026 by ScegliAuto
Video tutorial
Related tutorials
Vespa Px 125
.. on the Piaggio Vespa PX 125, as well as the LML Star 125 and Star 150. First, remove the right side panel of the engine and start by taking off.. …
Vespa Px 125
.. plug of the Piaggio Vespa PX 125, as well as the LML Star 125. First, place the central stand and start removing the right side case by turning the small.. …
Vespa Px 125
.. on the Piaggio Vespa PX 125, as well as the LML Star 125, in simple steps. First, lift the seat and open the two levers of the left storage compartment.. …
|
How to Change the Speed Unit on the Piaggio Mp3
If the speed displayed on your Piaggio Mp3 is in a unit of measurement different from your preference, simply follow this mini guide to change it independently. First, start this procedure with the bike completely off. Then, press and hold the "Mode" button on the right knob for about three seconds and turn on the display. Once done, press the "Mode" button again to switch between units (from Km/h to Mph or vice versa). Finally, hold down "Set" to save the changes. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.137
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
