Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Wheel of the Piaggio Vespa PX 125 - LML Star 125

Model: Piaggio Vespa Px 125
Part: Wheel

Video tutorial

Follow these instructions to remove and replace the rear wheel of the Piaggio Vespa PX 125 and the LML Star 125. First, place the central stand and begin by removing the left side storage box; then unscrew the spare wheel bolts. Next, lift the rear wheel off the ground and unscrew the five nuts, removing and replacing the rear wheel with the spare; then secure the wheel onto the drum, tightening the nuts in a criss-cross pattern, position the old wheel to the side, and refit the storage box!


Updated on 10 September 2026 by ScegliAuto


Related tutorials

How to Change the Rear Wheel of the Piaggio Vespa PX 125 - Lml Star 125
How to Change the Rear Wheel of the Piaggio Vespa PX 125 - Lml Star 125
Vespa Px 125 .. wheel of the Piaggio Vespa PX 125, as well as the Lml Star 125 and 150. First, place the central stand and start by removing the left side storage box;.. …
How to replace the tyre on the Piaggio Vespa PX 125 - LML Star 125
How to replace the tyre on the Piaggio Vespa PX 125 - LML Star 125
Vespa Px 125 .. tyre of the Piaggio Vespa PX 125, as well as the LML Star 125. First, place the central stand and lift the rear wheel off the ground; then, unscrew and.. …
How to Replace the Rear Suspension on a Piaggio Vespa PX 125 - Lml Star 125
How to Replace the Rear Suspension on a Piaggio Vespa PX 125 - Lml Star 125
Vespa Px 125 .. on a Piaggio Vespa PX 125, as well as on an Lml Star 125. First, place the central stand and begin to lift the rear wheel off the ground; then use.. …

How to Replace the Belt and Rollers on the Piaggio Vespa GTS 300

This guide briefly outlines the steps to remove and replace the belt and rollers of the variator on the Piaggio Vespa GTS 300 scooter, following the instructions below. First, place your scooter on the centre stand and begin unscrewing the screws of the transmission cover to remove it; then unscrew the nut of the fan and that of the clutch bell, as shown in the video. At this point, remove the belt and then the variator, replacing the rollers found inside; install the new belt and reassemble the transmission!

Watch the video!


by ScegliAuto

More videos