How do you replace the clutch of the Piaggio Vespa PX 125?

Model: Piaggio Vespa Px 125
Part: Clutch

This video is currently unavailable

In order to replace the clutch of the Piaggio Vespa PX 125, you need to loosen the screws that secure the engine transmission coupling cover, which is located under the rear wheel covering panel. Once this panel has been removed, it will be possible to loosen the screws that secure the underlying cover, which covers the clutch.

When this cover has been removed, it will be possible to locate the clutch, which can be released from its seat by loosening the fixing screws: this will allow you to insert the new clutch, checking that everything is working properly.

Posted on 19 December 2024 by ScegliAuto

Vespa Immobiliser: How to Transfer the Chip from the Old Key

In the case shown in the video, the new keys are not recognised by the ECU: the Vespa starts but does not run (thus the immobiliser is active). The solution shown in the video involves locating the immobiliser chip in the old key (the one recognised by the ECU). Open the cover on the key (only red master keys or some blue ones), remove the chip (which is a small black cylinder or rectangle), insert it into the new key in place of the new one, and try to start. Now the key will work. If the master key is red, it will definitely work. If it is blue, it might work: you need to cut the silicone; this is possible but a delicate operation. If it is a black clone key, then it is a system that does not work.

Watch the video!

by ScegliAuto

How do you replace the clutch of the Piaggio Vespa PX 125?

Related tutorials

Vespa Immobiliser: How to Transfer the Chip from the Old Key

More videos