Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today we will discover the instructions that will allow us to disassemble and replace the clutch cable of the Piaggio Vespa PX 125, as well as the PX 150 and PX 200. First of all, we put the central stand and start by disconnecting the clutch cable from the lever; then we disconnect the cable with the sheath on the lower part of the engine crankcase, unscrewing the adjusting screw, as shown in the video. At this point we install the new clutch cable, adjusting it from the adjusting screw; we fix the cable on the lever and adjust the cable if necessary until we reach the optimal disengagement.

Posted on 17 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Clutch Cable on a Piaggio Vespa PX 125
How to Replace the Clutch Cable on a Piaggio Vespa PX 125
Vespa Px 125 To replace the clutch cable on a Piaggio Vespa PX 125, loosen the bolt located at the lever on the left side of the handlebar, which is also connecte…
How to Replace the Throttle Cable on a Piaggio Vespa PX 125
How to Replace the Throttle Cable on a Piaggio Vespa PX 125
Vespa Px 125 This guide will illustrate the procedure for disassembling and replacing the throttle cable on the Piaggio Vespa PX 125. First, place the central sta…
How do you replace the clutch of the Piaggio Vespa PX 125?
Vespa Px 125 In order to replace the clutch of the Piaggio Vespa PX 125, you need to loosen the screws that secure the engine transmission coupling cover, which i…

How to Replace the Battery in a Yamaha FZ6?

Replacing the battery in the Yamaha FZ6, as shown in this tutorial, is a very simple and quick operation. First, ensure that the key is not inserted, then remove the rider's seat and, using a 10mm socket spanner, loosen the bolt on the tank hinge. Next, unscrew both the front bolts and the fairing mounting bolts, lift the entire tank, and disconnect both terminals starting with the negative. At this point, you can remove the upper plastic plate, take the battery out of its housing, and fit the replacement.

Watch the video!


by ScegliAuto

More videos