Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
This guide will illustrate the procedure for disassembling and replacing the throttle cable on the Piaggio Vespa PX 125. First, place the central stand and begin by removing the upper cover of the handlebars and the instrument panel by unscrewing the fixing screws; then disconnect the throttle cable from the grip, followed by disconnecting the cable from the fuel located above the engine block, as shown in the video. At this point, pull out the old cable and replace it with the new one, inserting it into the sheath and securing it properly!

Posted on 3 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the front brake cable of the Piaggio Vespa PX 125?
How do you replace the front brake cable of the Piaggio Vespa PX 125?
Vespa Px 125 In order to replace the front brake cable of the Piaggio Vespa PX 125, you need to loosen the nut that secures the cable to the corresponding lever, …
How to Replace the Speedometer Cable on the Piaggio Vespa PX 125
How to Replace the Speedometer Cable on the Piaggio Vespa PX 125
Vespa Px 125 This guide explains how to remove and replace the speedometer drive cable on the Piaggio Vespa PX 125, as well as the PX 200 and PK 50. First, discon…
How to replace the clutch cable of the Piaggio Vespa PX 125
How to replace the clutch cable of the Piaggio Vespa PX 125
Vespa Px 125 Today we will discover the instructions that will allow us to disassemble and replace the clutch cable of the Piaggio Vespa PX 125, as well as the PX…

How to Replace the Battery of the Kymco Agility 125?

To replace the battery of the Kymco Agility 125, lift the seat to access the compartment underneath. At the rear of the under-seat compartment, you will find the battery under the corresponding panel. By unscrewing the screws that secure the panel, you can access the battery underneath, which must be freed from the corresponding securing screws and the appropriate power cables. Once the device is free, insert the new one, connecting and securing it properly, and cover everything with the panel.

Watch the video!


by ScegliAuto

More videos