Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. : Accelerator

Accelerator - Do-it-yourself video guides

Keeway Superlight 125
How do you replace the throttle cable of the Keeway Superlight 125?
In order to replace the throttle cable of the Keeway Superlight 125, you need to loosen the appropriate nuts that secure the ends of the cable to their …read all…
Posted on 14 September 2023 by ScegliAuto
Ktm Duke 200
How do you replace the throttle cable of the KTM Duke 200?
In order to replace the throttle cable of the KTM Duke 200, you need to loosen all the screws that secure the fuel tank laterally and in the front and back: …read all…
Posted on 2 September 2023 by ScegliAuto
Benelli Bn 125
How to replace the throttle cable of the Benelli BN 125.
In this short and simple guide, we will see the instructions that will allow us to disassemble and replace the throttle cable of the Benelli BN 125 motorcycle, …read all…
Posted on 15 June 2023 by ScegliAuto
(Various brands) Various
How to replace the brake pads on the Sym 125 scooter.
The video shows how to replace the brake shoes on a scooter, but the procedure is the same for any scooter (including the Sym 125). To begin, remove the wheel …read all…
Posted on 8 April 2023 by ScegliAuto
Suzuki Gsx R 150
How do you replace the throttle cable on the Suzuki GSX-R 150?
In order to replace the accelerator cable of the Suzuki GSX-R 150 it is necessary to loosen the screws that fix the fairing positioned on the left side of the …read all…
Posted on 22 May 2023 by ScegliAuto
Yamaha Fz6
How to replace the throttle cable in Yamaha FZ6?
In this tutorial we can see how to replace the throttle cable in Yamaha FZ6, a very simple and fast operation. Let's start by disassembling the tank by …read all…
Posted on 21 May 2023 by ScegliAuto
Keeway Rks 150
How do you replace the throttle cable on the Keeway RKS 150?
In order to replace the accelerator cable of the Keeway RKS 150 it is necessary to loosen the bolt that fixes the end in correspondence with the butterfly …read all…
Posted on 28 April 2023 by ScegliAuto
Honda Honda Sh
How to open the seat of a Honda SH with a flat battery
In this video tutorial we are shown how to open the saddle of a Honda Sh 150 or 350 in manual mode, therefore using the plastic keys that are supplied with the …read all…
Posted on 10 April 2023 by ScegliAuto
Honda Honda Sh
How to reset the oil change warning light on Honda SH 300
In this video tutorial we are shown how to reset the oil warning light on a Honda SH 300 motorcycle. First we will have to turn on the ignition of the vehicle …read all…
Posted on 10 April 2023 by ScegliAuto
Gilera Dna 50
How do you replace the throttle cable on the Gilera DNA 50?
In order to replace the accelerator cable of the Gilera DNA 50 it is necessary to loosen the bolts that fix the transmission casing, located on the left side …read all…
Posted on 1 December 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos