Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the throttle cable on the Keeway Superlight 125, loosen the appropriate nuts that secure the ends of the cable to its housing: these will be connected directly to the right-hand grip and the front wheel, at its right side. Once these two nuts are loosened, you can completely detach the cable from its housing to insert a new replacement part. This can be secured using the appropriate bolts, ensuring everything functions correctly.

Updated on 17 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Dismantle and Clean the Carburettor of the Keeway Superlight 125
How to Dismantle and Clean the Carburettor of the Keeway Superlight 125
Superlight 125 In today's video tutorial, you will learn how to dismantle and clean the carburettor of the Keeway Superlight 125 motorcycle by following these simpl…
How to Start a Keeway Superlight 125
How to Start a Keeway Superlight 125
Superlight 125 Start by sitting on the rider's seat of your Keeway Superlight 125. Next, insert the key into the ignition switch and turn the key to activate the da…
How to replace the headlight bulb on the Keeway Superlight 125?
How to replace the headlight bulb on the Keeway Superlight 125?
Superlight 125 To replace the headlight bulb on the Keeway Superlight 125, loosen the screws around the lens of the headlight so that it can be removed from its hou…

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos