Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle and Clean the Carburettor of the Keeway Superlight 125

Model: Keeway Superlight 125
Part: Carburetor

Video tutorial

In today's video tutorial, you will learn how to dismantle and clean the carburettor of the Keeway Superlight 125 motorcycle by following these simple steps. First, unscrew the screws securing the carburettor to the intake manifold using a star key; then disconnect the throttle and choke cables, followed by removing the fuel hose, as shown in the video.

At this point, remove the carburettor from the engine; dismantle the float chamber and clean the jets and filter. Finally, reassemble everything!


Updated on 12 June 2026 by ScegliAuto


Related tutorials

How to Clean and Lubricate the Chain on a Keeway Superlight 125
How to Clean and Lubricate the Chain on a Keeway Superlight 125
Superlight 125 In this brief guide, learn how to maintain the chain by cleaning and lubricating it with grease on the Keeway Superlight 125, in simple and quick ste…
How to Start a Keeway Superlight 125
How to Start a Keeway Superlight 125
Superlight 125 Start by sitting on the rider's seat of your Keeway Superlight 125. Next, insert the key into the ignition switch and turn the key to activate the da…
How to Remove the Logo on a Keeway Superlight 125
How to Remove the Logo on a Keeway Superlight 125
Superlight 125 In this short video, you will see how to remove the manufacturer's logo from the tank of the Keeway Superlight 125 in simple and quick steps. To remo…

An Affordable Modification to Solve a Problem on the Yamaha MT07

This video shows how to solve a problem affecting the Yamaha MT07 with a very affordable modification. This bike requires a specific movement of the throttle grip to accelerate, which forces the right wrist into an unnatural twist. You can remedy this by fitting the throttle control from the R6, which reduces the rotation from 90° to 45°; the cost is under £25 even when buying the original part directly from the dealership. As shown, the disassembly and reassembly work is extremely simple; just be careful not to let the throttle guide slip, as it has its seat directly in the cover. You can see the difference in hand position after replacing the grip.

Watch the video!


by ScegliAuto

More videos