Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Logo on a Keeway Superlight 125

Model: Keeway Superlight 125
Part: Manufacturer emblem

Video tutorial

In this short video, you will see how to remove the manufacturer's logo from the tank of the Keeway Superlight 125 in simple and quick steps. To remove the logo, simply use an alcohol-based solution and rub with a cloth until the writing comes off. Alternatively, you can use a plastic scraper if the badge is an adhesive.

Then, wipe the surface clean with a cloth; finally, if you wish, apply the new manufacturer's badge!


Updated on 27 May 2026 by ScegliAuto


Related tutorials

How to Start a Keeway Superlight 125
How to Start a Keeway Superlight 125
Superlight 125 Start by sitting on the rider's seat of your Keeway Superlight 125. Next, insert the key into the ignition switch and turn the key to activate the da…
How to Clean and Lubricate the Chain on a Keeway Superlight 125
How to Clean and Lubricate the Chain on a Keeway Superlight 125
Superlight 125 In this brief guide, learn how to maintain the chain by cleaning and lubricating it with grease on the Keeway Superlight 125, in simple and quick ste…
How to replace the exhaust on the Keeway Superlight 125?
How to replace the exhaust on the Keeway Superlight 125?
Superlight 125 To replace the exhaust on the Keeway Superlight 125, loosen the screws that secure it to the housing: start by unscrewing the side screws that attach…

How to Replace the Front Headlamp Bulb on a Harley-Davidson Softail?

In this tutorial, you will see how to replace the front headlamp bulb on a Harley-Davidson Softail, a very simple and quick operation. First, ensure that the ignition is off for safety, then unscrew the screw located at the bottom of the headlamp, remove the outer ring and unscrew the additional screws indicated. Next, separate the headlamp from the base, disconnect the power connector, remove the rubber cap, and unclip the metal clip. At this point, simply replace the bulb and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos