Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on a Harley-Davidson Softail?

Model: Harley Davidson Softail
Part: Headlight bulb

Video tutorial

In this tutorial, you will see how to replace the front headlamp bulb on a Harley-Davidson Softail, a very simple and quick operation. First, ensure that the ignition is off for safety, then unscrew the screw located at the bottom of the headlamp, remove the outer ring and unscrew the additional screws indicated.

Next, separate the headlamp from the base, disconnect the power connector, remove the rubber cap, and unclip the metal clip. At this point, simply replace the bulb and reassemble everything by following the reverse procedure.


Posted on 7 November 2026 by ScegliAuto


Related tutorials

How to Remove the Front Headlamp and Bulb from a Harley Davidson Softail
How to Remove the Front Headlamp and Bulb from a Harley Davidson Softail
Softail .. the front headlamp and its bulb on a Harley Davidson Softail. First, place the motorcycle on its stand and begin unscrewing the fixing screw of the.. …
How to Replace the Headlamp on a Harley Davidson Softail
How to Replace the Headlamp on a Harley Davidson Softail
Softail .. To replace the headlamp on a Harley Davidson Softail, use a tool to pry off the chrome trim surrounding the headlamp. Once the trim is removed,.. …
How do you replace the headlight bulb of the Harley Davidson Softail?
How do you replace the headlight bulb of the Harley Davidson Softail?
Softail .. to replace the headlight bulb of the Harley Davidson Softail, you need to loosen the screws that secure the headlight assembly to its housing: these.. …

How to Replace the Front Brake Pads on the BMW G650 GS?

To replace the front brake pads on the BMW G650 GS, loosen the screws that secure the brake caliper to its housing on the corresponding disc. Once the securing screws are loosened, detach the caliper from its seat to remove the pads inside. These must be slid out by removing the pin that holds them in place, allowing you to insert the new ones. The new pads can now be secured inside the caliper, positioning it back onto the disc and fastening it properly with its screws.

Watch the video!


by ScegliAuto

More videos