Do it yourself
Frequently asked questions about cars and motorcycles
To replace the exhaust on a Sherco SE 300, loosen the screws that secure the rear side panel of the bike, which protects the exhaust itself. Once the exhaust is removed, you can loosen the screws that attach the exhaust to its mounts, and then loosen the screws that secure the clamp connecting the end can to the rest of the exhaust system. At this point, you can completely remove the exhaust and replace it with a new one, securing it properly and covering it with the side panel.

Updated on 4 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Se 300 To replace the exhaust silencer on the Sherco SE 300, first remove the right side panel, under which you will find the support for the upper part of …
Se 300 To replace the exhaust on the Sherco SE 300i, loosen the screws securing the right side panel at the rear of the bike: once this is removed, you will…
Se 300 To replace the clutch on the Sherco SE 300, loosen the bolts securing the cover on the right side of the bike, just below the exhaust. Once the bolts…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos