Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Exhaust on the Sherco SE 300i

Model: Sherco Se 300
Part: Exhaust muffler

Video tutorial

To replace the exhaust on the Sherco SE 300i, loosen the screws securing the right side panel at the rear of the bike: once this is removed, you will have access to the exhaust underneath, which must be freed from its mount by unscrewing the corresponding screw.

Once this is unscrewed, loosen the retaining ring by unscrewing the corresponding bolt to completely remove the old exhaust; this will allow you to insert the new one, securing it to the mount and connecting it via the retaining ring.


Updated on 17 July 2026 by ScegliAuto


Related tutorials

How to Replace the Exhaust on a Sherco SE 300?
How to Replace the Exhaust on a Sherco SE 300?
Se 300 To replace the exhaust on a Sherco SE 300, loosen the screws that secure the rear side panel of the bike, which protects the exhaust itself. Once the…
How to Replace the Exhaust Silencer on a Sherco SE 300?
How to Replace the Exhaust Silencer on a Sherco SE 300?
Se 300 To replace the exhaust silencer on the Sherco SE 300, first remove the right side panel, under which you will find the support for the upper part of …
How to Install the Exhaust Pipe Guard on the Sherco SE 300?
How to Install the Exhaust Pipe Guard on the Sherco SE 300?
Se 300 To install the exhaust pipe guard on the Sherco SE 300, position the structure at the front of the pipe, located immediately behind the front wheel. …

How to Set the Time on the Fz6

In this article, you will learn how to adjust the time on the Yamaha Fz6 with the help of a video. The procedure takes little time and requires no tools. To set the time, first start the instrument cluster. If the time is displayed, press both buttons on the side of the cluster simultaneously. When the time starts to flash, use the lower button to adjust the hour. Once the hour is set, confirm by using the upper button, then adjust the minutes and confirm again. At this point, the procedure will be complete.

Watch the video!


by ScegliAuto

More videos