Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To install the exhaust pipe guard on the Sherco SE 300, position the structure at the front of the pipe, located immediately behind the front wheel. The piece can be secured by placing it in position and inserting the locking plate at the rear of the guard. This will allow you to insert the fixing bolts and secure everything by adding the corresponding nuts at the rear plate. Once the bolts are inserted, check that the guard is properly secured.

Updated on 18 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Install the Skid Plate on the Sherco SE 300?
How to Install the Skid Plate on the Sherco SE 300?
Se 300 To install the skid plate on the Sherco SE 300, position it in its housing located at the front lower part of the vehicle. Once positioned, proceed t…
How do you replace the exhaust pipe of the Sherco SE 300?
How do you replace the exhaust pipe of the Sherco SE 300?
Se 300 In order to replace the exhaust pipe of the Sherco SE 300, you need to loosen the screws that attach the side panel of the motorcycle, so that you ca…
How to Replace the Fuel Hose on the Sherco SE 300?
How to Replace the Fuel Hose on the Sherco SE 300?
Se 300 To replace the fuel hose on the Sherco SE 300, insert the key into the designated lock located at the rear of the seat: once the key is inserted, tur…

How to Change the Engine Oil on a Beta RR 125?

To change the engine oil on a Beta RR 125, loosen the drain plug located at the bottom centre of the bike. Once removed, collect all the used oil in a suitably positioned container. After the oil has completely drained, remove the oil filter next to the drain plug to replace it with a new part. Now, refill by adding the necessary amount of oil through the hole on the right side of the engine casing.

Watch the video!


by ScegliAuto

More videos