Do it yourself
Frequently asked questions about cars and motorcycles
To install the skid plate on the Sherco SE 300, position it in its housing located at the front lower part of the vehicle. Once positioned, proceed to insert the appropriate screws that secure the plate to the frame in the lower area. After the plate is installed, ensure that it does not cause any issues while riding, especially during gear changes. You can remove this plate at any time by loosening the screws that hold it.

Updated on 13 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Se 300 To install the exhaust pipe guard on the Sherco SE 300, position the structure at the front of the pipe, located immediately behind the front wheel. …
Se 300 In order to replace the radiator hoses of the Sherco SE 300, you need to loosen the side protective panels that cover the hoses: once these panels ha…
Se 300 In this video tutorial, learn how to change the engine oil, performing the regular maintenance service, on a Sherco SE 300 enduro bike. First, warm u…

How to Replace the Engine Oil and Oil Filter on an Aprilia RSV 1000

This short video will show you how to carry out the routine maintenance service by replacing the engine oil and oil filter on the Aprilia RSV 1000 motorcycle. First, place your motorcycle on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then use the appropriate tool to unscrew and remove the oil filter, replacing the cartridge with a new one as shown in the video. Finally, unscrew the filler screw and top up by pouring in the suitable oil for your engine!

Watch the video!


by ScegliAuto

More videos