|
Do it yourself
| |||
| ||||
Model: Sherco Se 300
In this tutorial, learn the main steps to remove and clean the air filter on a Sherco SE 300 enduro bike. First, remove the seat of your bike; you will find the air filter underneath, where you will unscrew the central screw to remove it, as shown in the video. Next, wash the air filter with water and degreaser, then dry it thoroughly; you can also proceed directly with the replacement. For reassembly, simply apply the reverse procedure!
Updated on 4 May 2026 by ScegliAuto
Video tutorial
Related tutorials
Se 300
In this video, we will see how to clean or directly replace the air filter on the 2017 Sherco SE-R 300 by following these simple steps. First, remove…
Se 300
In this video, we will see how to remove and replace the air filter on a Sherco SE 250 and 300 enduro bike by following these simple steps. First, re…
Se 300
To replace the air filter of the Sherco SE 300, you need to unscrew the screws that secure the side panel on the left side of the motorcycle, immedia…
|
How to Remove the Final Drive from a BMW R 1200 GS?
To remove the final drive from a BMW R 1200 GS, loosen the bolts securing the exhaust so it can be removed along with the rear wheel. The rear wheel will also be removed by unscrewing the five bolts that secure it to the swingarm. Next, detach the brake caliper by unscrewing the mounting bolts and remove the rear part of the swingarm. Inside, you will find the final drive, which should be extracted and replaced with a new spare part; after replacement, reassemble all previously removed components. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |