Do it yourself
Frequently asked questions about cars and motorcycles

Model: Sherco Se 300
Part: Air filter

In order to replace the air filter of the Sherco SE 300, you need to release the pins located in the front and rear of the seat: once the seat is freed from its housing, you can locate the air filter underneath. This can be removed from its housing and replaced with a new spare part; after the replacement is done, you can close the filter box again. Once the box is closed, you can reinsert the seat and check that everything is working.

Posted on 27 August 2024 by ScegliAuto

Video tutorial

Related tutorials

Se 300 To replace the air filter on the Sherco SE 300, you will need to loosen the screws that secure the motorcycle seat to its housing: this will allow yo…
Se 300 To replace the air filter of the Sherco SE 300, you need to unscrew the screws that secure the side panel on the left side of the motorcycle, immedia…
Se 300 In this tutorial, learn the main steps to remove and clean the air filter on a Sherco SE 300 enduro bike. First, remove the seat of your bike; you wi…

How to Replace the Tyres on the Husaberg FE 450

In this guide, follow the instructions to remove and replace the tyres on the Husaberg FE 450 enduro bike. First, place the bike on a stand and lift the wheel off the ground; then, undo the bolts securing the brake caliper to remove it, as shown in the video. Next, unscrew the central axle of the wheel, removing the tyre from the rim (deflating it and using levers); then install the new tyre, ensuring it has the correct dimensions, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos