Do it yourself
Frequently asked questions about cars and motorcycles

Model: Sherco Se 300
Part: Pump

In this video, you will see how to remove the water pump on a Sherco SE 300 enduro bike in simple and quick steps. First, remove the coolant hose by loosening the metal clip screw; then unscrew the mounting screws of the pump cover using a socket spanner, as shown in the video. Once the cover is removed, take out the impeller, which acts as the pump; to do this, unscrew the central nut, holding the fan or using a pneumatic gun; replace it and reassemble everything!

Updated on 3 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Se 300 In this tutorial, learn the main steps to remove and clean the air filter on a Sherco SE 300 enduro bike. First, remove the seat of your bike; you wi…
Se 300 To remove the engine from the Sherco SE 300, unscrew the bolts securing the side panels that protect the part: this will allow you to unscrew the eng…
Se 300 To replace the clutch on the Sherco SE 300, loosen the bolts securing the cover on the right side of the bike, just below the exhaust. Once the bolts…

How to Replace the Front Bulb on the Honda SH 125

This tutorial explains the steps to replace the front headlamp bulb on the Honda SH 125. This is a very simple procedure. First, remove the front shield of the scooter to access the bulb replacement. To perform this first step, unscrew the lower screw and the two upper screws that secure the cover. At this point, the bulb will be clearly visible. Simply unscrew the bulb and insert a new one. It is recommended to carry out this procedure after ensuring that the bulb to be removed has cooled down.

Watch the video!


by ScegliAuto

More videos