Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Sherco Se 300

Watch this video to learn how to remove the master cylinder cover of the clutch on a Sherco SE 250 or 300 4-Stroke enduro bike. First, position your bike on a stand and unscrew the fixing screws of the side cover of the sprocket using a socket spanner; then unscrew the screws of the clutch cylinder cover, as shown in the video. At this point, you will be able to replace the cylinder itself or drain the pump fluid for replacement; for reassembly, simply apply the reverse procedure of disassembly!

Updated on 5 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Air Filter on a Sherco SE 250-300
Removing the Air Filter on a Sherco SE 250-300
Se 300 In this video, we will see how to remove and replace the air filter on a Sherco SE 250 and 300 enduro bike by following these simple steps. First, re…
How to Replace the Clutch Cylinder Protection Panel on a Sherco SE 300?
How to Replace the Clutch Cylinder Protection Panel on a Sherco SE 300?
Se 300 To replace the clutch cylinder protection panel on the Sherco SE 300, loosen the bolts securing the panel located directly above the sprocket. Once t…
How to Replace the Cylinder Head on the Sherco SE 300?
How to Replace the Cylinder Head on the Sherco SE 300?
Se 300 To replace the cylinder head on the Sherco SE 300, you need to access the components located at the top of the engine to remove them and gain access …

How to Service the Piaggio Vespa GTS 300

This brief guide will illustrate the main steps to perform the routine maintenance service on the Piaggio Vespa GTS 300, replacing the engine oil and oil filter. First, place the scooter on the centre stand and start by unscrewing the oil drain bolt found under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge using the appropriate tool, and hand-tighten the new one. Finally, unscrew the filler cap and top up, filling to the maximum level mark!

Watch the video!


by ScegliAuto

More videos