Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Sherco Se 300
Part: Air filter

In this video, we will see how to remove and replace the air filter on a Sherco SE 250 and 300 enduro bike by following these simple steps. First, remove the seat of your bike to access the air filter, which is located just underneath; then use a spanner to unscrew its central fixing screw, as shown in the video. At this point, remove the foam air filter and clean it or replace it with the same type; all that’s left is to reassemble everything by applying the reverse procedure of disassembly!

Updated on 28 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Clean or Replace the Air Filter on a Sherco SE-R 300
How to Clean or Replace the Air Filter on a Sherco SE-R 300
Se 300 In this video, we will see how to clean or directly replace the air filter on the 2017 Sherco SE-R 300 by following these simple steps. First, remove…
How to Remove and Clean Air Filter on Sherco SE 300
How to Remove and Clean Air Filter on Sherco SE 300
Se 300 In this tutorial, learn the main steps to remove and clean the air filter on a Sherco SE 300 enduro bike. First, remove the seat of your bike; you wi…
Removing the Master Cylinder Cover on Sherco SE 250-300 4T
Removing the Master Cylinder Cover on Sherco SE 250-300 4T
Se 300 Watch this video to learn how to remove the master cylinder cover of the clutch on a Sherco SE 250 or 300 4-Stroke enduro bike. First, position your …

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos