Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch on a Sherco SE 300

Model: Sherco Se 300
Part: Clutch

Video tutorial

To replace the clutch on the Sherco SE 300, loosen the bolts securing the cover on the right side of the bike, just below the exhaust. Once the bolts are loosened, remove the cover: this will allow you to unscrew the bolts securing the underlying clutch, so that all the plates can be removed and replaced with new spare parts.

After the new clutch has been fitted, secure it with the screws and seal it with the appropriate cover.


Updated on 14 May 2026 by ScegliAuto


Related tutorials

Removing the Master Cylinder Cover on Sherco SE 250-300 4T
Removing the Master Cylinder Cover on Sherco SE 250-300 4T
Se 300 Watch this video to learn how to remove the master cylinder cover of the clutch on a Sherco SE 250 or 300 4-Stroke enduro bike. First, position your …
How to Replace the Clutch Cylinder Protection Panel on a Sherco SE 300?
How to Replace the Clutch Cylinder Protection Panel on a Sherco SE 300?
Se 300 To replace the clutch cylinder protection panel on the Sherco SE 300, loosen the bolts securing the panel located directly above the sprocket. Once t…
How to Replace the Exhaust Silencer on a Sherco SE 300?
How to Replace the Exhaust Silencer on a Sherco SE 300?
Se 300 To replace the exhaust silencer on the Sherco SE 300, first remove the right side panel, under which you will find the support for the upper part of …

How to Set the Time on the Fz6

In this article, you will learn how to adjust the time on the Yamaha Fz6 with the help of a video. The procedure takes little time and requires no tools. To set the time, first start the instrument cluster. If the time is displayed, press both buttons on the side of the cluster simultaneously. When the time starts to flash, use the lower button to adjust the hour. Once the hour is set, confirm by using the upper button, then adjust the minutes and confirm again. At this point, the procedure will be complete.

Watch the video!


by ScegliAuto

More videos