Do it yourself
| ||||
|
Model: Sherco Se 300
The replacement of the exhaust pipe on the Sherco SE 300 is done by removing the right side panel, under which the support for the upper part of the exhaust pipe is located. Once the side panel has been removed, it will be possible to unscrew the bolt of the upper support and then also open the fastening ring that connects the exhaust pipe to the remaining part of the system. Once the old exhaust pipe has been freed, it will be possible to completely remove it so that it can be replaced with a new one, and then cover everything with the side panel.
Posted on 16 October 2023 by ScegliAuto
|
How to remove and replace the front wheel of the Honda Nc 750XToday we will see, in this short and simple guide, how to disassemble and replace the front wheel of the Honda Nc 750X motorcycle. First of all we put our bike on the central stand and we start to unscrew the fixing screws of the front brake caliper, in order to remove it from the disc; let's then loosen the central pin of the wheel, using a socket wrench, as shown in the video. At this point we lift the wheel from the ground with a jack or front stand; remove the pin and replace the wheel, applying the reverse procedure for reassembly! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.004
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |