Do it yourself
Frequently asked questions about cars and motorcycles
Today's brief instructions will show you how to drain and refill the transmission oil of the TM Racing SMR 125 motorcycle. First, place the bike on a stand and begin unscrewing the oil drain bolt found underneath the engine, allowing it to drain into a container for about ten minutes; then clean the drain plug of any metal debris, and unscrew the filler cap as shown in the video. At this point, pour in the new transmission oil of the correct type, filling until you reach the maximum level mark!

Updated on 4 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Smr 125 Follow the main instructions below to replace the transmission oil of the Tm Racing Smr 125 motorcycle. First, warm up the engine for a few minutes a…
Smr 125 To change the engine oil of the TM Racing SMR 125, loosen the drain plug located at the central lower part of the bike: by unscrewing this plug, the …
Smr 125 To change the engine oil on a TM Racing SMR 125, loosen the drain plug located at the bottom centre of the bike. This will allow all the oil to drain…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos