Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To change the engine oil of the TM Racing SMR 125, loosen the drain plug located at the central lower part of the bike: by unscrewing this plug, the oil will flow out into a suitably positioned container. Once all the oil has drained, close the oil drain plug to allow for the refill with new oil: the refill vent is located on the left side of the bike and can be accessed using a funnel.

Updated on 27 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Clutch Cover on TM Racing SMR 125
Replacing the Clutch Cover on TM Racing SMR 125
Smr 125 In this video tutorial, learn how to remove and replace the clutch cover on a TM Racing SMR 125. First, drain the engine oil by undoing the oil drain…
How to Mix Fuel for the TM Racing Smr 125
Smr 125 In this brief guide, we will go through the steps on how to correctly mix fuel for the TM Racing Smr 125 enduro bike. First, position yourself at the…
How to Change the Oil in the TM Racing SMR 125 Gearbox
How to Change the Oil in the TM Racing SMR 125 Gearbox
Smr 125 Today's brief instructions will show you how to drain and refill the transmission oil of the TM Racing SMR 125 motorcycle. First, place the bike on a…

How to Replace the Engine Oil and Oil Filter on an Aprilia RSV 1000

This short video will show you how to carry out the routine maintenance service by replacing the engine oil and oil filter on the Aprilia RSV 1000 motorcycle. First, place your motorcycle on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then use the appropriate tool to unscrew and remove the oil filter, replacing the cartridge with a new one as shown in the video. Finally, unscrew the filler screw and top up by pouring in the suitable oil for your engine!

Watch the video!


by ScegliAuto

More videos