Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this brief guide, we will go through the steps on how to correctly mix fuel for the TM Racing Smr 125 enduro bike. First, position yourself at the fuel pump and fill up with petrol; then take your mixing oil and a measuring cup, pouring 20 ml of oil (or 25 ml if running in) for every litre of petrol, as shown in the video. At this point, pour the mixing oil into the tank and wait a few seconds for the oil to mix with the petrol; then all that's left is to start the engine!

Updated on 10 August 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Adjust the Suspension on the TM Racing SMR 125?
How to Adjust the Suspension on the TM Racing SMR 125?
Smr 125 To adjust the suspension on the TM Racing SMR 125, consult the user and maintenance manual to understand how to properly tighten the bolts. To adjust…
How do you replace the footpegs of the TM Racing SMR 125?
Smr 125 In order to replace the footpegs of the TM Racing SMR 125, you need to loosen the nut that secures them to the respective housings on the side of the…
How do you replace the exhaust pipe of the TM Racing SMR 125?
How do you replace the exhaust pipe of the TM Racing SMR 125?
Smr 125 It will be possible to replace the exhaust of the TM Racing SMR 125 by loosening the screws that secure the terminal to its housing, next to the fend…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos