Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Tm Racing
    3. :
  3. Smr 125
    4. : How do you replace the piston of the TM Racing SMR 125?

Model: Tm Racing Smr 125
Part: Checks and maintenance
How do you replace the piston of the TM Racing SMR 125?

In order to replace the piston of the TM Racing SMR 125 you have to go to access the internal components of the engine: in particular, it will be necessary to unscrew the screws that fix the cylinder, inside which the piston is enclosed. By unscrewing these screws and disconnecting the connectors connected to the cylinder, it will be possible to remove the latter, so that you have access to the piston: this can now be removed from its connecting rod by removing its seeger ring. After the old piston has been removed, it will be necessary to insert the new one, also fitting the relative cylinder removed previously.


Posted on 21 May 2024 by ScegliAuto



How do you replace the TM Racing SMR 125 piston?
Smr 125 The piston replacement on the TM Racing SMR 125 is carried out by accessing the internal components of the engine: in particular, it will be necessar
How to change the gearbox oil of the Tm Racing Smr 125
Smr 125 We see below the main instructions that will allow us to replace the transmission oil of the Tm Racing Smr 125 motorcycle. engine, in order to remove
How do you replace the front fairing of the TM Racing SMR 125?
Smr 125 In order to replace the front fairing of the TM Racing SMR 125 it is necessary to unscrew the screws that fix it from the inside, that is, from the p

How to change the engine oil and the relative filter of the Ducati 999

The guide shows how to change the Ducati 999 engine oil. If you have racing stands, you can use them too. Start the motorcycle to make the oil fluid and remove the right fairing by removing the fixing points and the fixing bolts. Place a container under the oil pan to dispose of the fluid and unscrew the drain bolt; also unscrew the oil filler cap. Unscrew the four screws of the mesh filter and empty it; pay attention to the cap gasket. Detach the mesh filter from its housing, taking care not to break it; clean it well before reassembling it. Unscrew the oil filter and drain the fluid. Put the filters back in place, after having greased the gaskets and refilling the tank. Run the engine for a few minutes and then top up the oil level.

Watch the video!


by ScegliAuto

More videos