Do it yourself
Frequently asked questions about cars and motorcycles

Model: Keeway Sip 125
Part: Engine oil

To change the engine oil on a Keeway Sip 125, loosen the bolt securing the drain plug located at the bottom centre of the bike. Once removed, you can collect all the used oil in a suitably positioned container. After the oil has drained out, close the drain plug and top up the oil: this should be done by pouring oil into the breather located on the right side of the bike; this way, you can insert the necessary amount of oil and close the cap.

Updated on 4 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Sip 125 To replace the engine oil of a Keeway Sip 125 scooter, start by placing the scooter on a flat surface. Then, lift the scooter using the center stand.…
Sip 125 To replace the engine oil of the Keeway Sip 125, you will need to loosen the drain plug of the oil sump, which is located in the central lower part o…
Sip 125 In order to replace the gearbox oil of the Keeway Sip 125, you need to loosen the drain plug located on the rear right side of the transmission casin…

Replacing the Headlight Bulb on the Yamaha Mio 125

This brief guide will show you how to remove and replace the headlight bulb on the Yamaha Mio 125 scooter in simple and quick steps. First, place the scooter on the centre stand and begin to remove the front headlight; to do this, unscrew the fastening screws located at the bottom and disconnect the electrical connector of the light found at the back, as illustrated in the video. At this point, remove and replace the bulb with a new one of the correct type and with the same fitting; finally, reassemble the front headlight with its front fairing!

Watch the video!


by ScegliAuto

More videos