Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Gear Oil on a Keeway Sip 125

Model: Keeway Sip 125
Part: Transmission fluid

Video tutorial

You can change the gear oil on a Keeway Sip 125 by loosening the drain plug located at the rear of the transmission casing. Once the plug is removed, allow all the used oil to flow into a suitably positioned container.

This will enable complete drainage, after which you can proceed with topping up: insert the necessary amount of oil through the same breather, using a pump. Once the oil is inserted, close the casing to ensure everything is functioning correctly.


Posted on 22 May 2026 by ScegliAuto


Related tutorials

How to change the oil in the gearbox of the Keeway Sip 125?
How to change the oil in the gearbox of the Keeway Sip 125?
Sip 125 To change the oil in the gearbox of the Keeway Sip 125, you need to loosen the drain plug located at the rear right of the transmission casing. Once …
How to Change the Engine Oil on a Keeway Sip 125
How to Change the Engine Oil on a Keeway Sip 125
Sip 125 To change the engine oil on a Keeway Sip 125, loosen the bolt securing the drain plug located at the bottom centre of the bike. Once removed, you can…
How to Change the Engine Oil of a Keeway Sip 125?
How to Change the Engine Oil of a Keeway Sip 125?
Sip 125 To replace the engine oil of a Keeway Sip 125 scooter, start by positioning the scooter on a flat surface. Next, lift the scooter using the centre st…

How to Replace the Air Filter on a Keeway Matrix 50?

To replace the air filter on a Keeway Matrix 50, open the seat to access the screws securing the glove box located underneath. By unscrewing these screws, you can remove the glove box and access the components underneath: you will need to remove a clip that secures the air filter box, which can now be completely removed. After removal, unscrew the screws holding the cover of the box, detach it completely, and pull out the filter inside; after replacement, reinstall all previously removed components.

Watch the video!


by ScegliAuto

More videos