Do it yourself
Frequently asked questions about cars and motorcycles

How to change the oil in the gearbox of the Keeway Sip 125?

Model: Keeway Sip 125
Part: Transmission fluid

Video tutorial

To change the oil in the gearbox of the Keeway Sip 125, you need to loosen the drain plug located at the rear right of the transmission casing. Once this plug is loosened, all the used oil can flow into a suitably placed container.

This way, you can reinsert the plug and proceed with topping up through the breather located at the top of the casing. Once the necessary amount of oil has been added, start the engine to ensure everything is functioning correctly.


Updated on 17 October 2026 by ScegliAuto


Related tutorials

Sip 125 You can change the gear oil on a Keeway Sip 125 by loosening the drain plug located at the rear of the transmission casing. Once the plug is removed,…
Sip 125 The operation of replacing the air filter on the Keeway Sip 125 is carried out by loosening the screws that secure the casing located at the rear of …
Sip 125 To change the engine oil on a Keeway Sip 125, loosen the bolt securing the drain plug located at the bottom centre of the bike. Once removed, you can…

How to Replace the Exhaust on a Sherco SE 300?

To replace the exhaust on a Sherco SE 300, loosen the screws that secure the rear side panel of the bike, which protects the exhaust itself. Once the exhaust is removed, you can loosen the screws that attach the exhaust to its mounts, and then loosen the screws that secure the clamp connecting the end can to the rest of the exhaust system. At this point, you can completely remove the exhaust and replace it with a new one, securing it properly and covering it with the side panel.

Watch the video!


by ScegliAuto

More videos