Do it yourself
Frequently asked questions about cars and motorcycles

How do you replace the air filter of the Keeway Sip 125?

Model: Keeway Sip 125
Part: Air filter

Video tutorial

The operation of replacing the air filter on the Keeway Sip 125 is carried out by loosening the screws that secure the casing located at the rear of the motorcycle, immediately above the rear wheel and above the transmission. Once this casing has been located, it will be possible to unscrew the screws and remove the cover, so that the casing contained inside can be removed and replaced with a new one; after the replacement, the casing must be closed again with the appropriate screws, installing the cover and verifying that everything works correctly.


Posted on 7 July 2025 by ScegliAuto


Related tutorials

Sip 125 To replace the air filter on the Keeway Sip 125, loosen the screws securing the filter box located near the rear wheel. Once the screws are loosened,…
Sip 125 To replace the air filter on a Keeway Sip 125, loosen the screws that secure the cover located at the rear of the bike, just above the rear wheel and…
Sip 125 To replace the engine oil of the Keeway Sip 125, you will need to loosen the drain plug of the oil sump, which is located in the central lower part o…

How to Replace the Final Drive Oil of the Moto Guzzi Nevada 750

Today, we will go through the main steps for replacing the final drive oil of the Moto Guzzi Nevada 750. First, place the motorcycle on the centre stand and start unscrewing the final drive oil plug located under the transmission, allowing it to drain into a container for about ten minutes; then unscrew the filler cap to let the oil flow out more quickly. At this point, top up with the new transmission oil of the correct type (as indicated in the owner's manual), pouring the right amount of oil and finally securing the filler cap!

Watch the video!


by ScegliAuto

More videos