Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Gilera Smt 50
Part:

Today we will discover the main steps that will allow us to disassemble and replace the transmission chain and the sprocket of the Gilera Smt 50. First of all, we put the motorcycle on the stand and start by disassembling the rear wheel, disconnecting the transmission chain and unscrewing the central wheel pin; then we unscrew the screws of the sprocket fixed on the rim, in order to remove it and replace it with the new one (having the same teeth), as shown in the video. At this point, we install the new transmission chain and the wheel, finally adjusting the chain as per instructions.

Posted on 8 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Sprocket and Crown of the Gilera GP 800
How to Remove the Sprocket and Crown of the Gilera GP 800
Gp 800 Here are the instructions to remove and replace the sprocket and crown on the Gilera GP 800 scooter. First, place your scooter on the centre stand an…
Removing Chain and Sprocket on Husaberg FE 350
Removing Chain and Sprocket on Husaberg FE 350
Fe 350 In this video tutorial, we will see the instructions for removing the chain and sprocket from a Husaberg FE 350, following these steps. First, remove…
How to Replace the Chain, Sprocket, and Pinion on a Keeway RKV 125
How to Replace the Chain, Sprocket, and Pinion on a Keeway RKV 125
Rkv 125 In this guide, we will discover the main instructions on how to dismantle and replace the chain, sprocket, and pinion of the transmission on the Keew…

How to replace the headlight bulbs on a Suzuki GSXR 600?

In this tutorial, you will see how to replace the headlight bulbs on a Suzuki GSXR 600, an extremely simple and quick operation. First, ensure that the key is not inserted, then unscrew the two indicated screws and separate the dashboard from the support. Next, disconnect the power connectors of the bulbs, remove the rubber caps, and unclip the metal clips to extract the bulbs from their respective housings. At this point, you can insert the replacements, avoiding touching the glass directly with your bare hands, and follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos