Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil in the KTM Duke 390?

Model: Ktm Duke 390
Part: Engine oil

Video tutorial

In this tutorial, you can see how to change the engine oil in the KTM Duke 390, a very simple and quick operation. First, ensure the engine is cool enough, then remove the lower protective cover and place a container underneath the bike.

Next, locate the drain bolt, unscrew it with an 18mm socket spanner, and let all the oil in the system drain out. At this point, you can open the filter housing, remove the old filter, and insert the replacement. Finally, reassemble everything and pour in the new oil through the designated hole.


Updated on 6 August 2026 by ScegliAuto


Related tutorials

How to change the engine oil on the KTM Duke 390?
How to change the engine oil on the KTM Duke 390?
Duke 390 To change the engine oil on the KTM Duke 390, unscrew the oil drain plug located at the bottom of the bike to collect the used oil in a suitably posi…
How to Change the Engine Oil on a KTM Duke 390?
How to Change the Engine Oil on a KTM Duke 390?
Duke 390 To change the engine oil on a KTM Duke 390, you need to unscrew the oil drain plug located at the bottom of the bike, allowing the used oil to collec…
How do you replace the motor oil of the KTM Duke 390?
How do you replace the motor oil of the KTM Duke 390?
Duke 390 To perform the oil change on the KTM Duke 390, you will need to loosen the drain plug of the oil pan located in the central lower part of the vehicle…

How to Reset the Service Light on the Gilera Nexus 500

This video shows the procedure to reset the service light on the Gilera Nexus when the light remains on after a service. The procedure is straightforward and takes less than a minute. To reset the light, press the mode button and the odo/set button simultaneously. While holding them down, turn the ignition key to the ON position. Once the instruments are on, release the buttons and press the mode button once. The maintenance light will illuminate; hold the mode button for a few seconds to reset it.

Watch the video!


by ScegliAuto

More videos