Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the motor oil of the KTM Duke 390?

Model: Ktm Duke 390
Part: Engine oil

Video tutorial

To perform the oil change on the KTM Duke 390, you will need to loosen the drain plug of the oil pan located in the central lower part of the vehicle: once removed, you can collect all the old oil in a properly positioned container. At this point, you can also remove the oil filter located in the same position: you can now insert the new one and proceed with topping up. You can finish the procedure by pouring the necessary amount of oil from the vent on the right side of the bike.


Posted on 11 April 2025 by ScegliAuto


Related tutorials

How to change the engine oil in the KTM Duke 390?
How to change the engine oil in the KTM Duke 390?
Duke 390 In this tutorial, we will see how to change the engine oil in the KTM Duke 390, a very simple and quick operation. First, ensure that the engine is c…
How to Perform a Service on the KTM Duke 390
Duke 390 Discover how to carry out routine maintenance on the KTM Duke 390 by replacing the engine oil and oil filter. First, place the motorcycle on its cent…
How to Change the Engine Oil in the KTM Duke 390?
How to Change the Engine Oil in the KTM Duke 390?
Duke 390 In this tutorial, you will learn how to change the engine oil in the KTM Duke 390, a very simple and quick operation to perform every 12 months. Firs…

How to Replace the Brake and Clutch Levers on a Kawasaki Z750

Briefly follow these instructions to remove and replace the front brake and clutch levers on the Kawasaki Z750 motorcycle. First, place your motorcycle on a stand and start by unscrewing the pin for the front brake lever, loosening the nut located at the bottom; remove and replace the lever with a new one, securing it properly and finally adjusting the lever travel as shown in the video. Similarly, replace the clutch lever by unscrewing the pin; in this case, attach the metal cable to the lever and make the adjustment using the adjuster!

Watch the video!


by ScegliAuto

More videos