Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the engine oil in the KTM Duke 390?

Model: Ktm Duke 390
Part: Engine oil

Video tutorial

In this tutorial, we will see how to change the engine oil in the KTM Duke 390, a very simple and quick operation. First, ensure that the engine is cool enough, then place a container underneath the bike, locate the bolts of the two drain holes, and unscrew them using a socket wrench.

Allow all the oil in the system to drain out, open the filter cap, and insert the replacement. At this point, simply reassemble everything and add the necessary amount of oil through the designated upper hole.


Posted on 28 June 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil on a KTM Duke 390?
How to Change the Engine Oil on a KTM Duke 390?
Duke 390 To change the engine oil on a KTM Duke 390, you need to unscrew the oil drain plug located at the bottom of the bike, allowing the used oil to collec…
How do you replace the motor oil of the KTM Duke 390?
How do you replace the motor oil of the KTM Duke 390?
Duke 390 To perform the oil change on the KTM Duke 390, you will need to loosen the drain plug of the oil pan located in the central lower part of the vehicle…
How to Change the Engine Oil and Oil Filter on a KTM Duke 390
How to Change the Engine Oil and Oil Filter on a KTM Duke 390
Duke 390 Let's discover in this video how to perform the routine maintenance oil change on a KTM Duke 390 by following these simple steps. First, position you…

How to Reset the Service Light on the Gilera Nexus 500

This video shows the procedure to reset the service light on the Gilera Nexus when the light remains on after a service. The procedure is straightforward and takes less than a minute. To reset the light, press the mode button and the odo/set button simultaneously. While holding them down, turn the ignition key to the ON position. Once the instruments are on, release the buttons and press the mode button once. The maintenance light will illuminate; hold the mode button for a few seconds to reset it.

Watch the video!


by ScegliAuto

More videos