Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil in the KTM Duke 390?

Model: Ktm Duke 390
Part: Engine oil

Video tutorial

In this tutorial, you will learn how to change the engine oil in the KTM Duke 390, a very simple and quick operation to perform every 12 months. First, wait for the engine to cool down sufficiently, then position a container underneath and remove the lower fairing.

Next, undo the drain plug using a socket spanner, allowing all the oil in the system to drain out, and proceed by opening the filter housing cap. At this point, insert the replacement part, reassemble everything, and pour in the new oil through the designated hole.


Updated on 31 August 2026 by ScegliAuto


Related tutorials

How do you replace the motor oil of the KTM Duke 390?
How do you replace the motor oil of the KTM Duke 390?
Duke 390 To perform the oil change on the KTM Duke 390, you will need to loosen the drain plug of the oil pan located in the central lower part of the vehicle…
How to Change the Engine Oil in the KTM Duke 390?
How to Change the Engine Oil in the KTM Duke 390?
Duke 390 .. This tutorial shows how to change the engine oil in the KTM Duke 390, a very simple and quick operation. First, ensure the.. …
How to Change the Engine Oil in the KTM Duke 390?
How to Change the Engine Oil in the KTM Duke 390?
Duke 390 .. In this tutorial, you will see how to change the engine oil in the KTM Duke 390, a very simple and quick operation. First, ensure the.. …

How to Reset the Service Light on the Gilera Nexus 500

This video shows the procedure to reset the service light on the Gilera Nexus when the light remains on after a service. The procedure is straightforward and takes less than a minute. To reset the light, press the mode button and the odo/set button simultaneously. While holding them down, turn the ignition key to the ON position. Once the instruments are on, release the buttons and press the mode button once. The maintenance light will illuminate; hold the mode button for a few seconds to reset it.

Watch the video!


by ScegliAuto

More videos