Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil in the KTM Duke 390?

Model: Ktm Duke 390
Part: Engine oil

Video tutorial

This tutorial shows how to change the engine oil in the KTM Duke 390, a very simple and quick operation. First, ensure the engine is cool enough, then position a container underneath the motorcycle and remove the protective cover.

Next, unscrew the drain bolt using a socket spanner, remove the secondary filter, and clean it of any dirt residue. At this point, open the main filter housing, insert the replacement, reassemble everything, and pour in the new oil through the designated hole.


Updated on 12 September 2026 by ScegliAuto


Related tutorials

How to change the engine oil in the KTM Duke 390?
How to change the engine oil in the KTM Duke 390?
Duke 390 .. In this tutorial, we will see how to change the engine oil in the KTM Duke 390, a very simple and quick operation. First, ensure that.. …
How to Change the Engine Oil in the KTM Duke 390?
How to Change the Engine Oil in the KTM Duke 390?
Duke 390 .. In this tutorial, you can see how to change the engine oil in the KTM Duke 390, a very simple and quick operation. First, ensure the.. …
How to Change the Engine Oil in the KTM Duke 390?
How to Change the Engine Oil in the KTM Duke 390?
Duke 390 .. In this tutorial, you will learn how to change the engine oil in the KTM Duke 390, a very simple and quick operation to perform every.. …

How to Reset the Service Light on the Gilera Nexus 500

This video shows the procedure to reset the service light on the Gilera Nexus when the light remains on after a service. The procedure is straightforward and takes less than a minute. To reset the light, press the mode button and the odo/set button simultaneously. While holding them down, turn the ignition key to the ON position. Once the instruments are on, release the buttons and press the mode button once. The maintenance light will illuminate; hold the mode button for a few seconds to reset it.

Watch the video!


by ScegliAuto

More videos