Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Perform a Service on the KTM Duke 390

Model: Ktm Duke 390
Part: Engine oil

This video is currently unavailable

Discover how to carry out routine maintenance on the KTM Duke 390 by replacing the engine oil and oil filter. First, place the motorcycle on its centre stand and start by unscrewing the oil drain bolt located on the sump, allowing it to drain into a container for about ten minutes; then unscrew the screws of the small cover of the oil filter, removing and replacing the cartridge with a new one, as shown in the video.

Finally, pour the correct amount of engine oil until it reaches the maximum level mark.


Updated on 31 October 2026 by ScegliAuto


Related tutorials

How to Reset the "Service" Light on a KTM Duke 390
How to Reset the "Service" Light on a KTM Duke 390
Duke 390 Before starting, the regular service should already have been performed, and then you need to sit on the rider's seat of your KTM Duke 390. Start by …
How to adjust the time on the KTM Duke 390?
How to adjust the time on the KTM Duke 390?
Duke 390 In this tutorial, we can see how to adjust the time on the KTM Duke 390, an extremely simple and quick operation to perform, for example, after disco…
How to Change the Engine Oil and Oil Filter on a KTM Duke 390
How to Change the Engine Oil and Oil Filter on a KTM Duke 390
Duke 390 Let's discover in this video how to perform the routine maintenance oil change on a KTM Duke 390 by following these simple steps. First, position you…

How to Replace the Brake and Clutch Levers on a Kawasaki Z750

Briefly follow these instructions to remove and replace the front brake and clutch levers on the Kawasaki Z750 motorcycle. First, place your motorcycle on a stand and start by unscrewing the pin for the front brake lever, loosening the nut located at the bottom; remove and replace the lever with a new one, securing it properly and finally adjusting the lever travel as shown in the video. Similarly, replace the clutch lever by unscrewing the pin; in this case, attach the metal cable to the lever and make the adjustment using the adjuster!

Watch the video!


by ScegliAuto

More videos