Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the engine oil on the KTM Duke 390?

Model: Ktm Duke 390
Part: Engine oil

Video tutorial

To change the engine oil on the KTM Duke 390, unscrew the oil drain plug located at the bottom of the bike to collect the used oil in a suitably positioned container. After the oil has completely drained, remove the oil filter located on the right side of the vehicle at its lower part.

This will allow you to replace the old filter with a new one; finally, pour the new oil into the breather of the crankcase located on the right side of the bike.


Updated on 23 July 2026 by ScegliAuto


Related tutorials

How to change the engine oil in the KTM Duke 390?
How to change the engine oil in the KTM Duke 390?
Duke 390 In this tutorial, we will see how to change the engine oil in the KTM Duke 390, a very simple and quick operation. First, ensure that the engine is c…
How to Change the Engine Oil in the KTM Duke 390?
How to Change the Engine Oil in the KTM Duke 390?
Duke 390 In this tutorial, you will see how to change the engine oil in the KTM Duke 390, a very simple and quick operation. First, ensure the engine is cool …
How to Change the Engine Oil in the KTM Duke 390?
How to Change the Engine Oil in the KTM Duke 390?
Duke 390 In this tutorial, you will learn how to change the engine oil in the KTM Duke 390, a very simple and quick operation to perform every 12 months. Firs…

How to Reset the Service Light on the Gilera Nexus 500

This video shows the procedure to reset the service light on the Gilera Nexus when the light remains on after a service. The procedure is straightforward and takes less than a minute. To reset the light, press the mode button and the odo/set button simultaneously. While holding them down, turn the ignition key to the ON position. Once the instruments are on, release the buttons and press the mode button once. The maintenance light will illuminate; hold the mode button for a few seconds to reset it.

Watch the video!


by ScegliAuto

More videos