|
Do it yourself
| |||
| ||||
Model: Ktm Xc 300
Follow this guide on how to replace the coolant in the KTM XC 300 enduro bike, as well as the XC-W 300. First, place your bike on a stand and start by unscrewing the coolant drain screw located at the bottom of the water pump casing, allowing it to drain into a container for about ten minutes; then unscrew the radiator cap as shown in the video. At this point, top up with new coolant suitable for your radiator, filling to the maximum level mark!
Updated on 6 August 2026 by ScegliAuto
Video tutorial
Related tutorials
Xc 300
In this guide, we will look at the main instructions on how to remove and replace the front headlight of the KTM XC 300. First, place your bike on a …
Xc 300
This guide will provide the main instructions on how to dismantle and replace the stator on the KTM XC 300 enduro bike. First, place the bike on a st…
Xc 300
Here are the main instructions for removing and replacing the rear suspension on the KTM XC 300 enduro bike. First, place the bike on a stand and beg…
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |