Do it yourself
Frequently asked questions about cars and motorcycles
In this guide, learn how to perform the routine maintenance service by replacing the transmission oil on the KTM XC 300. First, warm up the engine for a few minutes; then, unscrew the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes, as shown in the video. Next, clean the upper part of the drain plug from any metallic residues; then unscrew the filler cap and top up with new gearbox oil, following the video tutorial to the end!

Updated on 4 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Xc 300 In this brief and simple guide, you will learn how to perform routine maintenance by changing the transmission oil in the KTM XC 300 enduro bike, as …
Xc 300 Follow these instructions to perform the routine maintenance service by replacing the gearbox and clutch oil on the Ktm XC 300. First, warm up the en…
Xc 300 In this brief and simple guide, see how to perform the routine maintenance service for the oil change of the KTM XC-W 300 two-stroke enduro bike. Fir…

Where is the Battery on the Piaggio Medley 125 Scooter and How to Remove It?

In this video, see where the battery is located on the Piaggio Medley 125 scooter and how to remove it, a very simple and quick operation. As shown, it is located behind the front storage compartment, positioned under the handlebars. To access it, first open the compartment, then remove the right cover by unscrewing the relevant screws with a cross-head screwdriver. Once done, unscrew the additional screws of the battery cover with a Torx T25 key, extract it, and disconnect both terminals with the same screwdriver. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos