Do it yourself
Frequently asked questions about cars and motorcycles
In this brief and simple guide, you will learn how to perform routine maintenance by changing the transmission oil in the KTM XC 300 enduro bike, as well as the 250. First, place your bike on a stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes. Then, unscrew the filler cap to allow the oil to drain more quickly. At this point, top up with new gearbox oil, filling to the correct level (approximately 0.8 litres).

Updated on 29 June 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Xc 300 Follow these instructions to perform the routine maintenance service by replacing the gearbox and clutch oil on the Ktm XC 300. First, warm up the en…
Xc 300 In this brief and simple guide, see how to perform the routine maintenance service for the oil change of the KTM XC-W 300 two-stroke enduro bike. Fir…
Xc 300 In this guide, learn how to perform the routine maintenance service by replacing the transmission oil on the KTM XC 300. First, warm up the engine fo…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos