Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Oil in the KTM XC-W 350 Gearbox

Model: Ktm Xc 300
Part: Transmission fluid

Video tutorial

In this brief and simple guide, see how to perform the routine maintenance service for the oil change of the KTM XC-W 300 two-stroke enduro bike. First, unscrew the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then clean the tip of the drain screw from any metallic residues, as shown in the video.

Next, unscrew the filler screw and pour in the new gearbox oil, the correct type for your bike; fill to the level and start the engine!


Updated on 11 May 2026 by ScegliAuto


Related tutorials

Xc 300 In this brief and simple guide, you will learn how to perform routine maintenance by changing the transmission oil in the KTM XC 300 enduro bike, as …
Xc 300 In this guide, learn how to perform the routine maintenance service by replacing the transmission oil on the KTM XC 300. First, warm up the engine fo…
Xc 300 In this tutorial, you will see how to change the transmission oil while performing the regular maintenance service on the KTM XC 300 2-stroke enduro …

How to Replace the Front Headlamp Bulb on a Harley-Davidson 883

In this tutorial, see how to replace the front headlamp bulb on a Harley-Davidson 883, a straightforward and quick operation. First, ensure the key is not inserted, then remove the outer ring of the headlamp by unscrewing the relevant bolt. Next, separate the headlamp from the base, disconnect the power connector, and remove the large rubber cap. At this point, release the metal clip, extract the old bulb, and insert the replacement, avoiding direct contact with the glass. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos