Do it yourself
Frequently asked questions about cars and motorcycles

Changing the Gearbox Oil of the KTM XC 300

Model: Ktm Xc 300
Part: Transmission fluid

Video tutorial

In this tutorial, you will see how to change the transmission oil while performing the regular maintenance service on the KTM XC 300 2-stroke enduro bike. First, place your bike on a stand and warm up the engine for a few minutes; then unscrew the oil drain bolt, allowing it to drain into a container for about ten minutes.

At this point, open the fill hole and pour in the new engine oil of the correct type (with the correct specifications indicated in the bike's user and maintenance manual)!


Updated on 3 June 2026 by ScegliAuto


Related tutorials

Xc 300 In this brief and simple guide, you will learn how to perform routine maintenance by changing the transmission oil in the KTM XC 300 enduro bike, as …
Xc 300 Follow these instructions to perform the routine maintenance service by replacing the gearbox and clutch oil on the Ktm XC 300. First, warm up the en…
Xc 300 In this guide, learn how to perform the routine maintenance service by replacing the transmission oil on the KTM XC 300. First, warm up the engine fo…

How to Replace the O-ring on the Clutch Rod of the LML Star?

To replace the O-ring on the clutch rod of the LML Star, lift the bike to loosen the side panel located near the rear wheel. Next, unscrew all the screws securing the rear wheel and the corresponding transmission cover: by removing the clutch, you will be able to locate the rod positioned behind it. This rod can now be removed from its housing by unscrewing the fastening screws; after the old rod has been removed, slide out the O-ring, replace it with a new one, and reassemble all previously removed components.

Watch the video!


by ScegliAuto

More videos