Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Oil Change for the Ktm XC 300 Gearbox

Model: Ktm Xc 300
Part: Transmission fluid

Video tutorial

Follow these instructions to perform the routine maintenance service by replacing the gearbox and clutch oil on the Ktm XC 300. First, warm up the engine for a few minutes, then start loosening the oil drain bolt located under the engine, allowing the oil to drain into a container for about ten minutes.

Next, clean the small oil filter, replacing it if it is too dirty.

Then, unscrew the filler cap and pour in the new transmission oil suitable for the clutch, filling it up to the maximum level mark.


Updated on 15 July 2026 by ScegliAuto


Related tutorials

How to Change the Oil in the Gearbox of the KTM XC 300
Xc 300 In this brief and simple guide, you will learn how to perform routine maintenance by changing the transmission oil in the KTM XC 300 enduro bike, as …
Changing the Gearbox Oil of the KTM XC 300
Changing the Gearbox Oil of the KTM XC 300
Xc 300 In this tutorial, you will see how to change the transmission oil while performing the regular maintenance service on the KTM XC 300 2-stroke enduro …
Replace the Gearbox Oil of the KTM XC 300
Replace the Gearbox Oil of the KTM XC 300
Xc 300 In this guide, learn how to perform the routine maintenance service by replacing the transmission oil on the KTM XC 300. First, warm up the engine fo…

How to Replace the O-ring on the Clutch Rod of the LML Star?

To replace the O-ring on the clutch rod of the LML Star, lift the bike to loosen the side panel located near the rear wheel. Next, unscrew all the screws securing the rear wheel and the corresponding transmission cover: by removing the clutch, you will be able to locate the rod positioned behind it. This rod can now be removed from its housing by unscrewing the fastening screws; after the old rod has been removed, slide out the O-ring, replace it with a new one, and reassemble all previously removed components.

Watch the video!


by ScegliAuto

More videos