Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Keeway Sip 125 - Videoguide

Keeway Sip 125
How do you replace the belt of the Keeway Sip 125?
In order to replace the belt of the Keeway Sip, you need to loosen the screws that fix the transmission cover, located on the left side of the motorcycle near …read all…
Posted on 26 October 2023 by ScegliAuto
Keeway Sip 125
How do you replace the front brake pads on the Keeway Sip 125?
In order to replace the front brake pads of the Keeway Sip 125, you need to loosen the screws that secure the brake caliper mounting pins to its corresponding …read all…
Posted on 23 September 2023 by ScegliAuto
Keeway Sip 125
How do you replace the engine oil of the Keeway Sip 125?
To replace the engine oil of the Keeway Sip 125, you need to loosen the screw that holds the drain plug of the tank: this will be located in the central lower …read all…
Posted on 2 July 2023 by ScegliAuto
Keeway Sip 125
How do you replace the air filter on the Keeway Sip 125?
To replace the air filter on the Keeway Sip 125, you need to loosen the screws that secure the cover located at the back of the bike, just above the rear wheel …read all…
Posted on 19 May 2023 by ScegliAuto
Keeway Sip 125
How to replace the front brake pads in Keeway SIP 125 scooter?
In this tutorial we can see how to replace the front brake pads on the Keeway SIP 125 scooter, an extremely simple and fast operation. First of all, let's go …read all…
Posted on 29 May 2023 by ScegliAuto
(1) Air filter (1) Engine oil (1) Brake pads (2)

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos