Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Belt on a Keeway Sip 125

Model: Keeway Sip 125
Part:

Video tutorial

To replace the belt on the Keeway Sip, you need to loosen the screws that secure the transmission cover, located on the left side of the bike near the rear wheel. Once these screws are loosened, you can remove the cover, locating the clutch and variator with the corresponding belt around them.

When the central nut securing the variator and clutch is loosened, you can remove them from their housing, also sliding off the corresponding belt and replacing it with a new one.


Updated on 25 August 2026 by ScegliAuto


Related tutorials

Sip 125 To replace the engine oil of a Keeway Sip 125 scooter, start by positioning the scooter on a flat surface. Next, lift the scooter using the centre st…
Sip 125 To replace the air filter on a Keeway Sip 125, loosen the screws that secure the cover located at the rear of the bike, just above the rear wheel and…
Sip 125 The operation of replacing the air filter on the Keeway Sip 125 is carried out by loosening the screws that secure the casing located at the rear of …

How to Replace the Air Filter on a Keeway Matrix 50?

To replace the air filter on a Keeway Matrix 50, open the seat to access the screws securing the glove box located underneath. By unscrewing these screws, you can remove the glove box and access the components underneath: you will need to remove a clip that secures the air filter box, which can now be completely removed. After removal, unscrew the screws holding the cover of the box, detach it completely, and pull out the filter inside; after replacement, reinstall all previously removed components.

Watch the video!


by ScegliAuto

More videos